P.O. Box 875638, Wasilla, AK 99687, USA

ENGINES, FLOATS, KITS, DECALS, ETC.

-> Floats
-> Limited edition kits

PRICES AND ORDERING INFORMATION

Khee-Kha's first 1:48 scale parts set:
an all-resin McKinnon engine conversion for the Grumman Widgeon, designed to fit the AZ Models and Classic Airframes kits.

The set includes parts for one Widgeon conversion as shown, 2 complete assemblies with optional round or sharp spinners,
scaled 3-view drawing, and installation tips.

Turbo Otter Vazar nose conversion, 9 parts.
1/72 scale resin castings for the Hobbycraft kit.

Also now available as part of a set with
Arctic Decals sheets for K2 Aviation
or Rust's Flying Service.

Click here to see Michel Leonardi's Vazar Otter with Rust's decals; a neat diorama.

Airglide C3200 hydraulic wheel-skis
for the Cessna 180 and 185:

Each set comes with a page of technical information, installation suggestions & diagrams.

1/72 scale Edo upgrade set.

This set provides standard Edo Beaching gear for Otters, Kingfishers, Beech 18's, Northrop N-3PB's and others. Seaplanes like the Otter and Beech 18 used four units; single-float aircraft like the Kingfisher used two. Six deck cleats are also included; that's two for the "carpet monster" in most cases.

1/72 scale Wright J-6 Whirlwind,

same as on the Khee-Kha Pacemaker kit, with Hamilton Standard ground-adjustable prop and 1 exhaust manifold of your choice (please specify single or double exhaust). Perfect for accurizing, conversions and scratchbuilding; many possible applications.

Trimotor "shipsets"

a package of 3 complete sets of the Wright J-6 engine, exhaust manifold and propeller castings, for use in converting existing Ford or Fokker trimotor kits to other versions. (Also an economical way to get a few of these for other scratchbuilding or conversion projects.)

A belly cargo pod for the Cessna 185.

Tundra tires and 3-bladed Hartzel prop shown here are included with the basic Cessna 180/185 kit.

Edo 38-3430 floats for the Waco YKS-6:

An Edo "flat-top" for the Stearman 76D-1, Cessna 195, Helio Courier, Stinson SR-5, L-13, Beech B-17L and C-17L, Waco CUC, YOC, DJC-6, ZQC-6, UEC, UIC, UKC, YKC-S...and of course the YKS-6, ZKS-7 and more.

The set comes with rudders, tiller bars, mooring cleats and a 2-sided sheet with scale installation 3-view, color notes and historical information on 3 Waco cabin biplanes.

Edo 39-4000 floats

1/72 scale, for use with the Dujin Waco ZQC-6 or VLE Fokker Universal.

These floats were also used on the Beech B-17E, R, C-17R, E-17B and F-17D Staggerwings, Ryan B-5 Brougham, Stinson SR-6, SR-7, SR-8, SR-9 and SR-10.

Each pair comes with rudders, tiller bars, mooring cleats, an accurate general arrangement drawing of the Waco Custom Cabin installation, color and history notes for 3 Canadian Waco ZQC-6 float planes.

Edo P-3300 floats for the Waco YKS.

Each pair comes with 6 deck cleats: 4 for your model and 2 for the "carpet monster"

 Fairchild P-6 floats

for the Khee-Kha Fairchild 71 are now available. Each pair of cast resin floats comes with 6 mooring cleats and a 2-sided sheet of drawings providing 3 views of the float installation and 2 color schemes for Alaskan F.71's, with technical and historical notes.

Edo J-5300 floats

suitable for the Khee-Kha Fairchild 71, Alaska Coastal Airways Vegas after 1944, or for converting the Special Hobby Lockheed Orion into Wiley Post's red and silver Orion/Explorer. Additional uses may occur to the dedicated scratchbuilder (see below); these floats were specified for the Fokker Super Universal and Consolidated Fleetster.

Comes with 4 mooring cleats and a double-sided 8 1/2" x 11" sheet of general arrangement drawings and color scheme profiles for 2 Alaskan Fairchild 71's and a Canadian FC-2W2 on J-5300's.

Based on masters produced originally by Jim Schubert.

Max Lacobara equipped his scratch-built Fokker Super Universal with Edo J-5300 floats from Khee-Kha Art. > right >

(The "water" is an odorless, non-toxic product from Woodland Scenics.)

(Click here to see another J-5300 float application, by Gabriel Stern.)

Edo K-4650 floats

perfect for most Bellanca Pacemaker and Lockheed Vega floatplane replicas.

Comes with 4 mooring cleats and a double-sided 8 1/2" x 11" sheet of general arrangement drawings for K-4650 installation on a Lockheed Vega, with color scheme information for 2 Lockheed Vega floatplanes and one Bellanca Pacemaker floatplane.

Click here for a build review of the CH-400 on K-4650 floats, by Gabriel Stern.

Edo 2870 floats

for the Cessna 180/185 series -Kit #005.

PRICES AND ORDERING INFORMATION

The Ellis Air Transport Waco YKS-6, with Edo P-3300 floats & Arctic Decals:

Waco YKS NC16210 was brought to Alaska, fresh from the factory, by Bob Ellis in the summer of 1936. In 1941 Ellis, already a Naval Reserve officer, was activated and for three months after Pearl Harbor he flew this Waco on antisubmarine patrol out of Ketchikan. A hole was cut in the floor through which a 100 lb. bomb could be dropped, and one rifle was also carried. (Read a build article on the Aircraft Resource Center web site).

The Vazar Turbo-Otter conversion set is now available with Arctic Decals sheets for
K2 Aviation or Rust's Flying Service.

The package, with one decal sheet of your choice, includes Mika's usual outstanding color diagrams. PRICES AND ORDERING INFORMATION

K2 Aviation usually operates their Turbo-Otters on skis; Rust's often flies on floats in summer.
(Click here to see Michel Leonardi's Vazar Otter with Rust's decals; a neat diorama.)

Each decal set comes with registrations for three different aircraft and enough trim, prop logos, etc. to detail two complete models.

Limited edition CH-300 "Lituanica" kit.
These include the basic Pacemaker kit plus extra wing and horizontal stabilizer parts to extend the kit wing and tail to J-300 Long Distance Special configuration, a diagram sheet detailing this conversion work, and decals from Arctic Decals of Finland. Included with the decals is a detailed color 3-view of the famous Lithuanian transAtlantic Bellanca and a history brochure with useful photos.

PLAN SET and MONOGRAPH for Russel Merrill's Anchorage Air Transport TravelAir CW/7000,
in 1/72 or 1/48 scale.

Finally, a plan set for one of the most famous and most rare of all bush planes. Only two were flown and only one had a radial engine.This item consists of one color page and five b&w pages for the 1/48 scale set, or one color page and three b&w pages for the 1/72 scale set, printed on one side each and corner stapled.

A brief history,two color profiles, multiple plan views, fuselage sections, landing gear and float options; just the thing for the scale scratch builder, bush aviation buff or anyone interested in very rare and esoteric commercial aircraft.

PRICES AND ORDERING INFORMATION

Ruben Husberg of LIMA NOVEMBER DECALS has released a limited edition kit of the Norwegian Waco YKS-7, LN-EAO, with Khee-Kha moldings for the airframe and Edo 38-3430 floats, and neatly printed decals for 2 color schemes including a WWII ambulance.
This kit is NOT available from Khee-Kha; order directly from LIMA NOVEMBER DECALS.