Khee-Kha Art Products
P.O.Box 875638 Wasilla, Alaska 99687
Kit #004 Waco YKS-6
Construction Photos, Page 1

The Waco YKS-6 is a more "typical" vac-form kit in that the fuselage is divided into standard halves, but makes up for the relative simplicity here by adding another pair of wings. Here we go...

Locating devices will be very handy as test-fitting will be done several times during the build. I like to alternate small tabs, using pencil marks across the centerline to guide positioning. Remember to leave room for the aft bulkhead, wing spars & instrument panel.

The chunk of sprue near the tail is the mounting point for the tail wheel.